CRYSL · Textile Auxiliaries

2026-11-12 · 5 min read · CRYSL technical team

How do you improve chlorine water fastness for swimwear and hotel textiles?

Short answer

Chlorine in pool water attacks dye chromophores and produces the familiar faded patches on swimwear and hotel towels. A chlorine water fastness improver applied in finishing lifts the chlorine water fastness rating by about 1 grade. Selection is by fibre: for pure cotton and cotton-blend fabrics use a cotton-targeted improver (10-30 g/L) tested against AATCC 162-2010 and ISO 105-E03-2010 and compatible with most other finishing agents; for polyamide and polyamide/spandex fabrics use a polyamide-targeted improver, which has relatively low substantivity to fabric and is therefore suitable for padding processes.

Why chlorine fades some fibres faster

Active chlorine reacts with both the dye and the fibre: on cotton it oxidises chromophores directly, and on polyamide it attacks the nitrogen-bearing structure of the fibre itself. This is why swimwear (polyamide/spandex) and poolside cotton textiles fail by different mechanisms and need fibre-matched chemistry rather than one universal product.

Cotton route vs polyamide route

For pure cotton and cotton blends, apply a chlorine water fastness improver such as MCL at 10-30 g/L: it improves chlorine water fastness by about 1 grade against AATCC 162-2010 and ISO 105-E03-2010 test standards, and is compatible with most finishing agents, so it slots into existing recipes.

For polyamide and polyamide/spandex fabrics (classic swimwear), apply NCL at 10-30 g/L: it also lifts chlorine water fastness by about 1 grade, but because its substantivity to fabric is relatively low it is suitable for padding processes only — plan the process route accordingly.

Set expectations with the buyer

A one-grade lift is the honest, testable promise: a fabric failing at grade 2-3 becomes a passing grade 3-4, not permanent immunity to pool water. Quote the improvement against the standard your buyer tests (AATCC 162 or ISO 105-E03) instead of promising absolute chlorine resistance.

Key data from the TDS

ProductTypical dosageAppearanceIonic characterSolubility
Chlorine Water Fastness Improver MCL10-30g/L———
Chlorine Water Fastness Improver NCL10-30g/LColorless transparent liquidNonionicEasily soluble in water

Full specifications, application instructions and packaging: see the linked TDS pages.

About CRYSL

Guangdong CRYSL New Materials Co., Ltd. is a textile auxiliary manufacturer based in Xintang, Zengcheng, Guangzhou, China, producing pre-treatment, dyeing and after-treatment, and functional finishing auxiliaries. The product range is certified under OEKO-TEX ECO PASSPORT and conforms to ZDHC MRSL V3.1 Level 3. Samples, TDS/COA documents and application support are available on request.

Contact: Ms. Luo · [email protected] · +86 186-7586-4963 · crysl.com.cn