CRYSL · Textile Auxiliaries

2026-11-12 · 6 min read · CRYSL technical team

How do you improve wet rubbing fastness on reactive-dyed cotton?

Short answer

Wet rubbing fastness failures on reactive-dyed cotton are almost always a surface-dye problem: hydrolysed, unfixed dye and fragmented fibre sit on the fabric surface and transfer onto the wet crock cloth. The fix has three layers — thorough washing-off after dyeing (hot rinse, soap, hot rinse), a proper cationic fixing treatment to immobilise residual dye, and a dedicated wet rubbing fastness improver padded at 20-60 g/L. A wet-rubbing improver forms a film or complex on the fibre surface so that loose colour cannot transfer; good products do this without damaging the other fastness properties of the fabric.

Root causes, ranked by frequency

First, incomplete washing-off: reactive dyes leave hydrolysed dye that soap-off must remove; heavy shades on tight fabrics suffer most. Second, fibre surface damage: excessive enzymes or abrasion leave micro-fibrils that carry dye onto the crock cloth. Third, the shade itself: deep navy, black and red reactive shades contain the largest amount of unfixed dye by weight.

Sulphur and direct dyed cotton show the same physics, which is why the same three-layer approach applies.

The three-step fix

Step 1 — washing-off: optimise the soap bath (temperature, time, and soap agent concentration) before touching the recipe. Step 2 — fixing: a cationic fixing agent reacts with the anionic dye-fibre system to immobilise residual dye; on cellulosics, a formaldehyde-free polymeric fixing agent improves washing, water-spotting and perspiration fastness without changing shade or handle. Step 3 — dedicated wet-rubbing treatment: pad a wet rubbing fastness improver (for example RUB, 20-60 g/L), which targets the rubbing fastness of cotton and cotton-blend fabrics dyed with reactive, sulphur or direct dyes without affecting other fastness properties.

Verify with the right test, on the worst shade

Run the wet crocking test (ISO 105-X12 or AATCC 8) on the deepest shade and in both warp and weft directions, dry and wet. Judge the improvement on the wet rating of the worst direction — that is the figure your buyer will test.

Key data from the TDS

ProductTypical dosageAppearanceIonic characterSolubility
Fixing agent RUB20-60g/LYellow transparent emulsionCationicEasily soluble in water

Full specifications, application instructions and packaging: see the linked TDS pages.

About CRYSL

Guangdong CRYSL New Materials Co., Ltd. is a textile auxiliary manufacturer based in Xintang, Zengcheng, Guangzhou, China, producing pre-treatment, dyeing and after-treatment, and functional finishing auxiliaries. The product range is certified under OEKO-TEX ECO PASSPORT and conforms to ZDHC MRSL V3.1 Level 3. Samples, TDS/COA documents and application support are available on request.

Contact: Ms. Luo · [email protected] · +86 186-7586-4963 · crysl.com.cn