CRYSL · Textile Auxiliaries

2026-11-12 · 6 min read · CRYSL technical team

Why does nylon/spandex fabric yellow after high-temperature setting, and which anti-yellowing agent works?

Short answer

Yellowing after high-temperature setting is oxidative: at setting temperatures the amino groups in polyamide and the polyurethane segments of spandex oxidise and form yellow chromophores. Two finishing routes prevent it. A nonionic liquid antioxidant (for example KF-150, 20-40 g/L) applied before setting prevents the yellowing of polyamide/spandex elastic fabrics during high-temperature greige or finished-goods setting, with no effect on handle or colour, easy wash-off and no interference with subsequent dyeing; it is free of APEO and NPEO. Where an ADH-free requirement applies, an ADH-free powder agent (for example KF-300, 5-10 g/L) gives very good high-temperature anti-yellowing with high solubility and no sediment.

The mechanism in one paragraph

Polyamide fibres and spandex both contain nitrogen-bearing groups that are heat-sensitive. During greige setting or finished-goods setting at high temperature, oxygen attacks these groups (oxidative degradation of amino groups), and the reaction products are yellow. The damage accumulates with temperature and dwell time, so a fabric set twice — once greige, once finished — shows more yellowing than a once-set fabric of the same lot.

Two agent types, two use cases

Use a liquid nonionic antioxidant when the fabric will be dyed after setting: KF-150 prevents polyamide elastic fabrics from yellowing in high-temperature environments, is easy to wash off and does not interfere with subsequent dyeing, and contains no APEO or NPEO or other restricted substances.

Use the ADH-free powder type when the recipe must be free of adipic dihydrazide: KF-300 prevents the yellowing of polyamide or polyamide-containing fabrics at high temperature caused by oxidative degradation of amino groups, dissolves easily and leaves no sediment or floating matter at 5-10 g/L.

Process discipline still matters

Anti-yellowing agents buy margin, they do not license abuse: keep setting temperature and dwell at the fabric specification, minimise repeated setting cycles, and cool the fabric before it is rolled or packed. Combine the agent route with the packaging route (BHT control) when the fabric is polyamide/spandex — storage yellowing and thermal yellowing are different reactions and a fabric can suffer both.

Key data from the TDS

ProductTypical dosageAppearanceIonic characterSolubility
Anti-Thermal yellowing agent KF-15020-40g/LColorless transparent liquidNonionicEasily soluble in water
Anti-Thermal yellowing agent KF-3005-10g/LWhite powderNonionic (uncharged)Easily soluble in water

Full specifications, application instructions and packaging: see the linked TDS pages.

About CRYSL

Guangdong CRYSL New Materials Co., Ltd. is a textile auxiliary manufacturer based in Xintang, Zengcheng, Guangzhou, China, producing pre-treatment, dyeing and after-treatment, and functional finishing auxiliaries. The product range is certified under OEKO-TEX ECO PASSPORT and conforms to ZDHC MRSL V3.1 Level 3. Samples, TDS/COA documents and application support are available on request.

Contact: Ms. Luo · [email protected] · +86 186-7586-4963 · crysl.com.cn