CRYSL · Textile Auxiliaries

2026-11-12 · 6 min read · CRYSL technical team

Why do nylon and spandex fabrics turn yellow during storage, and how do you prevent phenolic yellowing?

Short answer

Phenolic yellowing is a chemical reaction, not a quality fault of the dye: butylated hydroxytoluene (BHT), a common antioxidant in packaging films and cartons, migrates onto nylon or spandex fabric and reacts with nitrogen oxides (NOx) in the air, producing yellow by-products that are strongest where fabric touches packaging. Prevention works on two fronts: finish the fabric with an anti-phenolic-yellowing agent (for example, 2-4 g/L of an anti-phenolic agent in the final rinse or padding bath) and specify low-BHT packaging materials. An anti-phenolic finishing step has little effect on fabric shade and does not reduce light fastness.

The reaction chain: packaging + air, not the dye

During packaging, storage and transport, polyamide and polyamide/spandex fabrics can yellow or discolour because phenolic antioxidants (typically BHT) in the packaging material react with nitrogen oxides (NOx) in the air. The reaction products are yellow and concentrate on the fabric surface, especially where the fabric is in long contact with film, tissue paper or the inside of a carton.

This is why the defect often appears after warehousing or container shipment even though the fabric left the mill in perfect white: the trigger is the storage environment, not the dyeing or setting process.

How to tell it apart from thermal yellowing

Phenolic yellowing shows a typical pattern: yellowing is strongest on the fabric side that touched packaging, and can often be reproduced by storing a folded sample in the suspect packaging for a few days. Thermal yellowing (oxidation of amino groups at high setting temperatures) is more uniform across the fabric and correlates with setting history instead of packaging.

If the yellowing follows the packaging contact pattern, work on the prevention route below; if it follows the heat history, look at anti-thermal-yellowing finishing instead.

Prevention checklist

First, finishing: treat the fabric with an anti-phenolic-yellowing agent such as APY (anti-phenolic yellowing agent, dosage 2-4 g/L) during final finishing. It prevents yellowing caused by contact with BHT during packaging, has little effect on fabric colour and does not affect light fastness.

Second, packaging: specify BHT-free or low-BHT films, tissue and cartons, and avoid polystyrene-heavy packaging combinations. Third, logistics: reduce dwell time in hot, poorly ventilated warehouses, because the reaction rate rises with temperature.

Key data from the TDS

ProductTypical dosageAppearanceIonic characterSolubility
Anti-phenolic yellowing agent APY2-4g/LPale yellow liquidAnionic / nonionicEasily soluble in water

Full specifications, application instructions and packaging: see the linked TDS pages.

About CRYSL

Guangdong CRYSL New Materials Co., Ltd. is a textile auxiliary manufacturer based in Xintang, Zengcheng, Guangzhou, China, producing pre-treatment, dyeing and after-treatment, and functional finishing auxiliaries. The product range is certified under OEKO-TEX ECO PASSPORT and conforms to ZDHC MRSL V3.1 Level 3. Samples, TDS/COA documents and application support are available on request.

Contact: Ms. Luo · [email protected] · +86 186-7586-4963 · crysl.com.cn