How do you raise the UPF of fabrics with UV-protection finishing agents?
Short answer
UPF is raised by adding a UV-absorbing finishing agent that converts UV radiation into harmless energy before it penetrates the fabric. The efficient route is one-bath: on cellulosic fabrics, a reactive-group UV absorber (30-60 g/L) applies in the same bath as reactive dyeing, giving very good UV protection with a high number of wash cycles; on polyester, a UV absorber designed for disperse dyeing (1-3 g/L) works in the dye bath at 130 °C, delivering very good UV protection and a high level of UV shielding. One-bath application avoids a separate finishing pass, which is why it is the standard industrial route.
Cellulosic fabrics: ride the reactive dyeing bath
A UV absorber that carries reactive groups for cellulosic fibres can be applied in the same bath as reactive dyeing: after the one-bath dyeing treatment the fabric shows very good UV protection and, because the absorber is fixed like a dye, a high number of wash cycles. Typical dosage is 30-60 g/L by the standard reactive dyeing profile.
Polyester: ride the disperse dyeing bath
For polyester and its blends, use a UV absorber designed for one-bath application with disperse dyeing: treated in the dye bath at 130 °C, the fabric shows very good UV protection and a high level of UV shielding. Typical dosage is only 1-3 g/L, which makes UV protection a low-cost functional claim to add on polyester.
What actually moves the UPF number
Fabric construction moves UPF more than any chemistry: tighter weave, deeper shade and heavier weight all raise it. Finishing chemistry is the lever for fabrics whose construction is fixed — light-coloured summer knits, thin shirtings, white garments. Validate UPF after washing, because a claim that disappears after five launderings will not survive buyer testing.
Key data from the TDS
| Product | Typical dosage | Appearance | Ionic character | Solubility |
|---|---|---|---|---|
| UV-absorbing Finishing Agent UVA | 30-60g/L | Milky white liquid | Anionic / nonionic | Easily soluble in water |
| UV-absorbing Finishing Agent for Polyester UVP | 1-3g/L | Milky white liquid | Anionic | Easily soluble in water |
Full specifications, application instructions and packaging: see the linked TDS pages.
About CRYSL
Guangdong CRYSL New Materials Co., Ltd. is a textile auxiliary manufacturer based in Xintang, Zengcheng, Guangzhou, China, producing pre-treatment, dyeing and after-treatment, and functional finishing auxiliaries. The product range is certified under OEKO-TEX ECO PASSPORT and conforms to ZDHC MRSL V3.1 Level 3. Samples, TDS/COA documents and application support are available on request.
Contact: Ms. Luo · [email protected] · +86 186-7586-4963 · crysl.com.cn